In general, we select the type of stabilizer based on the requirements of the product in the formulation. For the selection of stabilizers in PVC, we have summarized the following key points:
1.Lead salt stabilizers are mainly used in rigid products. Lead salt stabilizers have good thermal stability, excellent electrical properties, and are inexpensive. However they are highly toxic, prone to contaminating products, and can only be used to produce opaque products.


2. Barium-cadmium stabilizers are a type of stabilizer with better performance. They are widely used in agricultural PVC films. They usually used in combination with barium-cadmium-zinc, organic phosphites, and antioxidants.

3.Calcium zinc stabilizers can be used as non-toxic stabilizers in food packaging, medical devices, and pharmaceutical packaging, among other flexible products Their stability is relatively low, and they are generally used in combination with polyols and antioxidants to improve their performance. Additionally, the use of calcium zinc complex stabil in rigid products such as pipes is also gradually becoming mature.


4. Organotin stabilizers have good performance and are suitable for rigid and transparent PVC products. In particular, octyl tin has become an stabilizer for non-toxic packaging products, but it is relatively expensive.

5.Epoxy stabilizers are usually used as auxiliary stabilizers. When used in conjunction with barium, cadmium, calcium, and zinc stabil, they can enhance light and heat stability.






