①Preparation:
Before installation, you need to prepare all the necessary materials and tools. You will need PVC cove ceiling, light steel keel, suspension rod, expansion screws, tape measure, electric drill, screwdriver, etc. Make sure you have enough cove ceiling and that the length of the keel is appropriate.
②Install the keel:
First, use a tape measure to measure the size on the ceiling, determine the position of the keel, drill holes with an electric drill, and fix the expansion screws. Then connect one end of the suspension rod to the expansion screw, and hang the light steel keel on the other end, and tighten it with a screwdriver. The keel should be installed horizontally and vertically, so that the扣 plate can be installed flat.
③Install the cladding plate:
Align one end of the PVC cladding plate with the groove of the keel, and gently push it in, installing one piece at a time. Pay attention to the direction of the cladding plate and the joint when installing, to ensure a tight and neat joint. If there is a need for cutting, use a utility knife to carefully cut according to the size.
④Finishing check:
After all the clips are installed, carefully check them once to see if there are any loose, uneven places. Make adjustments promptly if there are any problems.
As long as you follow these steps, step by step, you can also easily replace the old PVC ceiling panels for your home and make the space look new again!
