·PVC plastic steel profiles
PVC Plastic steel profiles refer to PVC profiles used to make doors and Windows, which appeared in Germany as early as the late 1950s, and were introduced in China only in 1983, and began to be widely used in the late 1990s.
Plastic steel profiles referred to as plastic steel, the main chemical composition is PVC, so it is also called PVC profiles. Is widely used as a new type of building material, due to its physical properties such as rigidity, elasticity, corrosion resistance, anti-aging properties, is usually used as copper, zinc, aluminum and other non-ferrous metals excellent substitute.



·PVC plastic steel doors and Windows
The strength of the doors and Windows processed by PVC profiles alone is not enough, and steel is usually added in the cavity to enhance the fastness of the doors and Windows, so the plastic doors and Windows made of steel added inside the profiles are usually called plastic steel doors and Windows. With the wide application of plastic steel doors and Windows, the PVC profiles used to make plastic steel doors and Windows are commonly called plastic steel profiles. Plastic steel is also a common material for guardrail.

· Raw materials for PVC plastic steel doors and Windows
PVC plastic steel profile: polyvinyl chloride (PVC) resin as the main raw material, according to the proportion of adding stabilizer, coloring agent, filler, ultraviolet absorber, etc., after extrusion molding to obtain profiles.



(Raw materials → Profiles → finished products)
· Advantages of PVC plastic steel doors and Windows
① High cost performance
The price of plastic is much lower than that of aluminum, which has the same strength and longevity, and this has become increasingly apparent due to the sharp rise in metal prices.
② Rich color
The application of colored plastic steel profiles adds a lot of color to the construction field. In the past, wooden doors and Windows were used, in order to achieve harmony and consistency between doors and Windows and the appearance of the building, most of the paint was sprayed on the surface of the doors and Windows, and the paint was easily aging and peeling after ultraviolet light, and it would become unrecognizable in a few years, and the service life of the building could not be coordinated. Later, colored aluminum doors and Windows were invented, but the price was high, and the average consumer could not afford it. The appearance of plastic doors and Windows solves this problem, and color film profiles can even achieve the effect of fake wood grain.
③ Durable
The strength of the profile is greatly improved by adding reinforced steel into the cavity of the profile, which has the effect of earthquake resistance and corrosion resistance. In addition, the multi-cavity structure of the profile and the independent drainage cavity also make the water unable to enter the reinforced steel cavity, avoid the corrosion of the steel, and improve the service life of the doors and Windows. The addition of anti-ultraviolet components also improves the weather resistance of plastic steel profiles, even in tropical areas with strong ultraviolet rays.
④ Good insulation performance
The thermal conductivity of the plastic steel profile itself is far less than that of the aluminum profile, and the design of the multi-cavity structure is to achieve the effect of heat insulation. Research shows that the same type of room, the indoor temperature of the room with plastic steel doors and Windows in summer is on average 5-7 ° C lower than that of the room with aluminum doors and Windows, and it is 8-15 ° C higher in different regions in winter.
⑤ Good sound insulation performance
The installation of insulating glass, well-sealed plastic steel doors and Windows has very excellent sound insulation performance. In modern society, sound insulation has become the main condition for everyone to choose doors and Windows, especially in downtown residential. The assembly of plastic steel doors and Windows adopts the welding process, and the closed multi-cavity structure has a significant shielding effect on noise.

· Application of PVC plastic steel doors and Windows
In housing construction, PVC plastic steel doors and Windows are mainly used in push-pull, flat open doors and Windows, guardrail, pipe and ceiling materials. Through the new process process is also widely used in the automotive engine protection plate, not only light weight, but also high toughness, with excellent rigidity, sometimes known as alloy plastic steel.








