TPR is the abbreviation of Thermo-Plastic-Rubber material, TPR material room thermoplastic Rubber material, is a kind of rubber elasticity without vulcanization, can be directly processed (such as injection molding, blow molding, extrusion, etc.) thermoplastic soft rubber material.

TPR material is based on thermoplastic styrene butadiene rubber (such as SBS, SEBS) as the raw material, adding resin (such as PP, PS) filler, plasticizing oil agent and other functional additives to blend modified materials.
·TPR elastic particles ·
Appearance: Color transparent or white granules, can also be changed to other colors according to requirements. The shape is a particle, usually with round spheroids, ellipsoids and fine round bars, the surface is bright, with better reflective performance.

·TPR elastic particle characteristics ·
TPR elastic particles show superior product characteristics in production and processing:
① No vulcanization required.
② Excellent elasticity at room temperature.
③ It has the properties of rubber and the plasticity of plastics.
④ Production materials can be recycled and reused to reduce costs.
·TPR Shoe Material ·
TPR shoe material, is a thermoplastic elastomer SBS and other functional additives blend modified a polymer material, after mixing, extrusion, injection molding and molding process made of soles. It has the advantages of non-slip, low temperature resistance, strong bending, good air permeability, small density, strong bond strength, etc., and the waste can be recycled. Therefore, TPR materials have received attention in the shoe industry.


· Production process ·
In order to improve the processing performance of SBS, enhance fluidity, flexure, anti-aging, anti-deformation, anti-fire and improve economic benefits, it is necessary to add a variety of additives in the pure rubber for blending and extrusion granulation, in order to process into a variety of products with different properties.

· Recipe Suggestions ·
The composition of raw materials has a great impact on the performance of the product: the purpose of adding granular material to the filling material of TPR shoes is mainly to reduce the cost, while increasing the hardness and wear resistance of the product, the commonly used fillers are SiO2, CaCO3, titanium dioxide, talc, white carbon black; With the increase of the number of filling materials, the hardness increases obviously, but the tensile strength and elongation at break decrease. Therefore, the filling content should not be too high, and the type and dosage need to be selected according to the requirements of product performance and processing technology. Usually white carbon black does not exceed 5% and is used in combination with calcium carbonate. Calcium carbonate dosage is determined according to product requirements.

Chemical additives: Add 0.5% stearic acid to the formula to play a lubricating, compatible, plasticizing effect; Adding 1-2% AC blowing agent to increase the expansion force of TPR material can effectively overcome the sag phenomenon, and the product surface finish is uniform. Micro-foaming can reduce the proportion of shoe material, which is conducive to the reduction of cost. However, excessive foaming will affect the quality indicators such as product hardness and strength, and its dosage is controlled at 0.5%.



· Product application ·
TPR elastic particles are widely used in daily products, hardware tools, bags and tires, toy equipment, auto parts, medical products, wire cables, electronic appliances, communication instruments and footwear products. Among them, the footwear and toy industry is mainly the TRP application field of SBS substrate; The modified materials with SEBS as the base material are mainly used in product applications with high aging resistance, weather resistance and material physical tensile strength requirements, and ultra-low material hardness (less than 5 degrees Shore hardness).
The shoe material produced by TPR elastic particles not only has the characteristics of high elasticity and low temperature resistance of rubber, but also has the characteristics of easy processing, continuous production and easy recovery of side materials. In particular, it has excellent low temperature resistance, high friction coefficient and strong gripping force, and is a new type of material with high performance and convenient processing.







